b'FEDERAL LIGHTING REGULATIONSTrailersFederal Lighting Equipment Location RequirementsBasic Equipment Required On All TrailersDescription Mandatory RequirementsArea Equipment (SAE Lens Coding) Functional Purpose Quantity Color Location Height mm (in.) from the groundTail Lamps (T) Indicate vehicle\'s presence andMinimum 2 Red On the rear - symmetrical - as far apart as practicable 380-1830 (15-72)widthStop Lamps (S) Indicate braking Minimum 2 Red On the rear - symmetrical - as far apart as practicable 380-1830 (15-72)1 Rear Turn Signal(I) Indicate direction of turn Minimum 2 Red orOn the rear - symmetrical - as far apart as practicable 380-2110 (15-83)Lamps YellowRear Reflex(A) Indicate vehicle\'s presence andMinimum 2 Red On the rear - symmetrical - as far apart as practicable- facing380-1530 (15-60)Reflectors width rearwardLicense Plate 2 Lamp(s) (L) Illuminates license plate Minimum 1 White On the rear - above or at the sides of license plate No requirement(P2,PC* or P3, PC2*)Rear Side Marker*photometricallyMinimum 2 Red Each side at rear - as far back as practicable 380-1530 (15-60) no max. for Lamps certified at installationvehicle under 2.032m (80") wide3 angleRear Side Reflex(A) Minimum 2 Red Each side at rear - as far back as practicable facing sideward 380-1530 (15-60)Reflectors Front and rear side marker lamps (P2, PC* or P3, PC2*) / side reflex reflectors indicate Front Side Marker*photometricallyvehicle\'s presence and length4a Lamps certified at installationMinimum 2 Yellow Each side at front - as far forward as practicable 380 (15) minimumangleFront Side ReflexEach side at front - as far forward as practicable facing 4b Reflectors (A) Minimum 2 Yellow sideward 380-1530 (15-60)Additional Equipment For Trailers Exceeding The Following ParametersLENGTH 9.1 m (30 ft) OR LONGERDescription Mandatory RequirementsArea Equipment (SAE Lens Coding) Functional Purpose Quantity Color Location HeightIntermediate Side Marker 5a Lamps (P2 or P3) Indicate presence of a long vehicle Minimum 2 Yellow Each side near center - facing sideward 380 (15) minimumIntermediate Side Reflex 5b Reflectors (A) Indicate presence of a long vehicle Minimum 2 Yellow Each side near center - facing sideward 380-1530 (15-60)WIDTH 2.032 m (80 in.) OR WIDERDescription Mandatory RequirementsArea Equipment (SAE Lens Coding) Functional Purpose Quantity Color Location Height mm (in.) from the ground(P2, PC*or P3, PC2*) Show vehicle\'s width - MAY Rear ClearanceAt widest point - symmetrical - on the rear or nearAs high as practicable - may be lower only if 6 Lamps *photometrically certified atNOT be combined with tailMinimum 2 Red the rear - facing rearward ID lamps are at the topinstallation angle lampsIn Canada: at the top - maybe lower if door Rear IdentificationIndicate presence of a wideOn the rear - center, facing rearward - horizontally 7 Lamps (P2 or P3) vehicle Exactly 3 Red spaced 150 mm (6 in.) to 300 mm (12 in.) apart header narrower than 25 mmin USA: as high as practicable(P2, PC*or P3, PC2*)Front ClearanceAt widest point - symmetrical - as far forward as 8 Lamps *photometrically certified atShow vehicle\'s width Minimum 2 Yellow practicable - facing forward As high as practicableinstallation angleWidth 2.032 m (80 in.) or Wider And Gvwr 4536 Kg (10,000 Lb.) or MoreDescription Mandatory RequirementsArea ConspicuityDOT Coding Quantity Color Location Height OPTIONSTreatmentExactlyRear Upper Body2 pairs of 9 Marking 300mm longWhite On the rear upper corners - facing rearward At the top Reflex reflectors may not be strips required if they are replaced, Bumper BarOn the rear bumper bar\'s horizontal element - fullin their required location, with 10 Marking DOT-C, Continuous Red/White width - facing rearward No requirement conspicuity treatmentDOT-C2, Red/ Optional in CanadaRear Lower BodyOn the rear - full width of the vehicle - facingAs horizontal as practicable and as close as practicable 11 Marking DOT-C3, or Continuous White seerearward to the range of 375 to 1525 mm from the ground Rear lower body and side DOT-C4 options conspicuity treatment may also be Red/ Each side - facing sideward - continuous, or evenlysolid white, solid yellow, or white spaced over minimum of 50% of length, startsAs horizontal as practicable and as close as practicableand yellow.12 Side Marking see location White seeand ends as close to the front and rear or vehicleto the range of 375 to 1525 mm from the groundoptions as practicable432 Grand General Accessories LLC | 1965 E. Vista Bella Way, Rancho Dominguez, CA 90220 | www.GrandGeneral.com | Tel 800.325.0578 310.631.2589 | Fax 888.289.3668 310.631.3568 2023 Grand General Accessories LLC. All Rights Reserved2022 Lighting Catalog VOL16 Part 10 Auxillary.indd 432 11/22/22 10:46 AM'