b'FEDERAL LIGHTING REGULATIONSTrucks, Buses, MPVsFederal Lighting Equipment Location RequirementsBasic Equipment Required On All Trucks, Buses & MPVsDescription Mandatory RequirementsArea Equipment (SAE Lens Coding) Functional Purpose Quantity Color Location Height mm (in.)from the ground(H, HR): Attention: US: "DOT" letteringOn the front - symmetrical - as far apart Headlamps - Lower Beam required on lens Forward road illumination Minimum 2 White as practicable560-1370 (22-54)Attention: US & Canada: light source(If 4 lamp system - outboard or above code required on lens upper beams)(H, HR): Attention: US: "DOT" letteringOn the front - symmetricalHeadlamps - Upper Beam required on lens Forward road illumination Minimum 2 White (If 4 lamp system - inboard or below560-1370 (22-54)Attention: US & Canada: light source 1 code required on lens lower beams )Parking Lamps-Attention: Required only(P) Indicate parked vehicle Minimum 2 White orFront - symmetrical - as far apart as560-1370 (22-54)on vehicles less than 2032mm wide Yellow practicableDaytime Running Lamps - (Y2): Attention: for US, "DRL" letteringWhite orFront - symmetrical - as far apart as380 (15) minimum Maximum Attention: for Canada required, for USrequired on lens if device is notIndicate in-use vehicle Minimum 2 Yellow practicable depends on type of DRLoptional.headlampFront Turn Signal/Hazard Warning(l) Indicate direction of turn /Minimum 2 Yellow Front - symmetrical - as far apart as380-2110 (15-83)Lamps identify disabled vehicle practicableFront Clearance Lamps- (P2, PC* or P3*,PC2): At widest point - symmetrical - on the 2 Attention: Required for vehicles*photometrically certified at installationShow vehicle\'s width Minimum 2 Yellow front or near the front - facing forward As high as practicable2032mm wide or wider angleon the front - center - horizontally Indicate presence of a wideAs high as practicable or on 3 Front Identification Lamps (ID) (P2 or P3) vehicle Exactly 3 Yellow spaced 150 mm (6 in.) to 300 mm (12top of cabin.) apart(P2, PC* or P3 ,PC2*): *photometricallyEach side at front - as far forward as 4a Front Side Marker Lamps certified at installation angle Minimum 2 Yellow practicable 380 (15) minimumFront and Rear side markerAt front - symmetrical - as far forward as 4b Front Side Reflex Reflectors (A) lamps / side Minimum 2 Yellow practicable - facing sideward 380-1530 (15-60)(P2, PC* or P3, PC2*)Reflex reflector indicateEach side at rear - as far back as 5a Rear Side Marker Lamps** *photometrically certified at installationvehicle\'s presence and length Minimum 2 Red practicable 380 (15) minimumangleRear Side Reflex Reflectors** Each side at rear - as far back as 5b **not required on Truck Tractors (A) Minimum 2 Red practicable - facing sideward 380-1530 (15-60)Rear Clearance Lamps (P2, PC* or P3, PC2*) Show vehicle\'s width - As high as practicable-may Attention: Required for vehiclesAt widest point - symmetrical - on the 6 2032mm wide or wider, but not*photometrically certified at installationMAY NOT be combined withMinimum 2 Red rear or near the rear - facing rearward be lower only if rear ID lamps required on Truck Tractors angle tail lamps are at the topRear Identification Lamps Rear - center - horizontally spaced 150in Canada : at the top - (ID): Attention: Required for vehiclesIndicate presence of a widemaybe lower if door header 7 2032mm wide or wider, but not(P2 or P3 ) vehicle Exactly 3 Red mm (6 in.) to 300 mm (12 in.) apart,narrower than 25mmrequired on Truck Tractors facing rearward in USA: as high as practicableTail Lamps (T) Indicate vehicle\'s presenceMinimum 2 Red On the rear - symmetrical - as far apart380-1830 (15-72)and width as practicableStop Lamps (S) Indicate braking Minimum 2 Red On the rear - symmetrical - as far apart380-1830 (15-72)as practicable8 Indicate direction of turn/Red orOn the rear - symmetrical - as far apart Rear Turn Signal/Hazard Warning Lamps (I) identifies disabled veh. Minimum 2 Yellow as practicable 380-2110 (15-83)Rear Reflex Reflectors (A) Show vehicle\'s presenceMinimum 2 Red On the rear - symmetrical - as far apart380-1530 (15-60)and width as practicable - facing rearwardIlluminate ground behind the 9 Backup Lamp (R) vehicle and alert road users Minimum 1 White Rear No requirementOn the rear - above or at the sides of 10 License Plate Lamp(s) (L) Illuminates license plate Minimum 1 White license plate No requirementCenter High Mounted Stop Lamp11 Attention: Required for vehicles less(U3) Indicates braking Minimum 1 Red On the rear - centerline of the vehicle 860 (34) minimumthan 2032mm wide and 4536kgAdditional Equipment For Specific VehiclesVehicles 9.1 m (30 ft.) Long or LongerDescription Mandatory RequirementsArea Equipment (SAE Lens Coding) Functional Purpose Quantity Color Location Height12a Intermediate Side Marker Lamps (P2 or PC) Indicate presence of a long vehicle Minimum 2 Yellow Each side near center 380 (15) minimum12b Intermediate Side Reflex Reflectors (A) Indicate presence of a long vehicle Minimum 2 Yellow Each side near center - facing sideward 380-1530 (15-60)Truck TractorsDescription Mandatory RequirementsArea Conspicuity Treatment DOT Code Quantity Color Location Height OptionsDOT-C, DOT-C2,Exactly 2 pairs of 300mmRear upper corners of cab - 12a Rear Upper Body Marking DOT-C3, or DOT-C4 long strips White facing rearward As high as practicable excluding fairingsRear - facing rearward - on DOT-C, DOT-C2,Exactly 2 sections of min.Red/ fenders, on mud flapsAs horizontal as practicable and not higherIf mud flaps not used - on the cab or 12b Rear Marking DOT-C3, or DOT-C4 600mm each White brackets, or within 300mmthan 1525 mm from the ground frame mounted bracketsbelow of the top of mud flapsGrand General Accessories LLC | 1965 E. Vista Bella Way, Rancho Dominguez, CA 90220 | www.GrandGeneral.com | Tel 800.325.0578 310.631.2589 | Fax 888.289.3668 310.631.3568 435 2023 Grand General Accessories LLC. All Rights Reserved2022 Lighting Catalog VOL16 Part 10 Auxillary.indd 435 11/22/22 10:46 AM'